Tilt Rod And Piston Assembly; Trim Rod And Piston Assembly - BOMBARDIER Johnson 90 Service Manual

POWER TRIM AND TILT-140
DISASSEMBLY
Pull the tilt rod/piston assembly
G)
out of the cylinder body.
Remove the free pisten ~ from the cylinder body.
Tilt Rod and Piston Assembly
Unscrew the pisten retaining nut from the bottom of the tilt
rod and remove the washer.
Carefully retain and account for tour shock valves, each com­
posed of spring, rod and ball.
Remove the pisten assembly and PTT cylinder head from the
tilt rod by sliding them down and off the rod end.
Trim Rod and Piston Assembly
Using special tool, unscrew the trim cylinder head.
1Tíill.1 326485:
PTT cylinder cap tool
Pull the trim rod/piston assembly out of the trim cylinder.
8-35