Installation; Low Pressure Fuel Pump; Removal/Installation - BOMBARDIER Johnson 90 Service Manual

FUELSYSTEM
LOW PRESSURE FUEL PUMP
LOW PRESSURE FUEL PUMP
Removal / lnstallation
REMOVAL
1. Disconnect inlet hose
G)
and outlet hose
(2)
from low
pressure fuel pump.
2. Remove two bolts @.
3.
Remove fuel pump
®·
Note position before removing
0-
ring @.
INSTALLATION
lnstallation is reverse order of removal with special attention
to the following steps.
IACAUTION
1
• Before installing fuel pump, rotate the crankshaft to
bring No. 1 (top cylinder) piston to Top Dead Center on
compression stroke.
• Do not reuse O-ring once removed. Always use a new
O-ring.
C!J
Low pressure fuel pump bolt: 10 N,m
(1.0 kg-m; 7.0 lb-ft)
5-14