LOWER UNIT
REMOVAL ANO DISASSEMBLY - 140 {NORMAL ROTATION)
REMOVAL ANO DISASSEMBLY -140
(NORMAL ROTATION)
. 4 ~ WARNING
Always disconnect the battery cable, before removing
lower unit.
1. Shift to "NEUTRAL" position.
2. Remove bolt and trim tab
G).
3. Remove seven (7) bolts
(2)
and separate gearcase @
from driveshaft housing.
NOTE:
Before gearcase is removed complete/y, disconnect
soeed
ometer pick up tube 4 from gearcase.
4. Remove clutch rod from clutch shaft (if necessary}.
5. Place a drain pan under oil drain plug.
Remove upper vent plug @ first then lower drain plug @
and allow gear oil to drain.
lnspect oil for water, contaminants or metal.
. • ..
. ,.--- ~
~~,
,.
-----
9-32