LOWER UNIT
INSPECTION
INSPECTION
NOTE:
lf excessive wear, cracks, defects ar other damage is found
on any component, replace component.
NOTE:
Thoroughly wash al/ metal components with c/eaning solvent
and dry with compressed air.
~._WARNING
Wear safety glasses when using compressed air.
Propeller
• lnspect propeller for bent, chipped or broken blades.
Replace or repair if necessary.
• lnspect propeller bushing splines for wear or other dam
age. Replace if necessary.
• lnspect propeller bushing for deterioration or slipping.
Replace if necessary.
Gearcase Housing
• lnspect gearcase for cracks or other damage. Replace if
necessary.
• lnspect pinion bearing for pitting, rough or other damage.
Replace if necessary.
NOTE:
lf removal and replacement are required, see "Removal of
PIN/ON BEARING" section on page 9-8.
Gears
• lnspect forward, reverse and pinion gear teeth and engag
ing dogs for excessive wear or other damage. Replace if
necessary.
• lnspect forward gear bearing for pitting, rough or other
damage. Replace if necessary.
9-39