Fuel Vapor Separator / High Pressure Fuel Pump; Removal/ Installation - BOMBARDIER Johnson 90 Service Manual

FUEL SYSTEM
FUEL VAPOR SEPARATOR / HIGH PRESSURE FUEL PUMP
FUEL VAPOR SEPARATOR / HIGH
PRESSURE FUEL PUMP
Removal / lnstallation
REMOVAL
~~WARNING
The components after the high pressure fuel pump
remain pressurized at all times. To protect against fuel
spray, relieve fuel line pressure before disconnecting or
removing components.
1 . Remove intake manifold assembly. (See page 6-2)
2. Remove three bolts and fuel vapor separator assembly
from intake manifold.
3. Disconnect fuel outlet hose from fuel vapor separator.
INSTALLATION
lnstallation is reverse order of removal. See page 6-4 for
installation of intake manifold assembly.
5-7