Oil Pump; Removal - BOMBARDIER Johnson 90 Service Manual

POWER UNIT
OIL PUMP
OIL PUMP
Removal
1. Remove power unit. (See page 6-5 to 6-1 O)
NOTE:
Hold camshaft by placing a wrench on hexagon area of cam-
shaft.
2. Remove bolt securing oíl pump drive sprocket to cam­
shaft, then remove oil pump drive sprocket.
3. Remove three (3) bolts
G)
and oil pump assembly
(2).
4. Remove circlip @, driven sprocket
©,
pin @ and washer.
lnspection
Oil
pump
lnspect outer/inner rotors and oíl pump body for wear or
other damage. Replace if necessary.
Seal ring
lnspect of seal ring for nick, cut or wear.
Orive/ driven sprocket
lnspect teeth of sprocket for wear or other damage. Replace
if necessary.
6-15