Anodes Ano Bonding Wires - BOMBARDIER Johnson 90 Service Manual

PERIODIC MAINTENANCE
MAINTENANCE ANO TUNE-UP PROCEDURES
Anodes and Bonding Wires
[ lnspect every 50 hours (3 months).
ANODES
lf 2/3 of zinc anode has corroded away, replace anode. The
anode should be periodically cleaned with a wire brush to
ensure maximum effectiveness.
t
IACAUTION
1
Never paint the anode.
NOTE:
The anode securing bolt should be covered with silicone
sea/.
•S I ~
Silicone Seal
BONDING WIRES
• lf breakage or other damage is found on bonding wire,
replace wire.
• lf rust, corrosion or other damage is found on terminal,
clean with cleaning solvent or replace wire.
2-19