Operation; (A) Standard Folding Of Standard-Size Paper - Formax FD 372 Operator's Manual

(7) Operation

(A) Standard folding of standard-size paper

How to perform standard folding of
standard-size paper:
Flip power switch to on position.
Loosen the paper guide sets-crew and set the paper
guide to fit the width of the paper.
Neatly arrange paper and place it on the paper feed table
with its printed side facing up (its printed side down in
case of fold-out).
Make sure the paper guides contact the paper and
tighten the setscrew.
Setting the paper discharge roller:
The discharge roller should be moved to the proper
position that suits the paper size.
Note:
Refer to "Roller position indication" label. If ejection is
not performed properly set to a different position.
Example:
Set the roller to position one when using 8 ½" x 11"
paper.
Roller position indication label
12