Switching The Power On; Test Folding - Formax FD 332 Operator's Manual

Switching the Power on:

Insert the power plug into the outlet.
Set the POWER to ON position.
Note:
Remove the power plug from the outlet after use.
Setting Fold Plate Table Position
Half nut lever
Pull the half-nut lever to move the stopper plate to the
desired position on table 1 and 2. Align the arrow on the
stopper plate with the desired fold marks on the tables and
release the half-nut and the stopper plate will be locked in
position.

Test Folding

Press the Test key to feed two sheets of paper.
Check if the paper has been folded correctly by
examining the second of the two folded sheets.
If the fold position is not correct, refer to
"Fine Adjustments" pages 11 & 12
11