Paper Length] Input Screen (Non-Standard Paper); Folding Mode] Select Screen - Formax FD 3302 Operator's Manual

No. Name
[3]
(Cancel) key
5-4.

[Paper Length] input screen (non-standard paper)

[1]
[2]
[3]
[4]
No. Name
[1] Paper length setting value
[2] Preview screen
[3]
(Return) key
[4]
(Clear) key
[5] Numeric keypad
[6]
(Standard size switching)
key
[7]
(Cancel) key
5-5.

[Folding Mode] select screen

[1]
[2]
[3]
[5]
[6]
Returns to the previous screen.
Press and hold to return to the [Ready] screen.
Displays the currently set paper length.
Displays the position of the input value.
Saves the input value and transits to the next screen.
When you touch the key when the input value is outside the specification
range, the value that you can specify is displayed on the preview screen.
Sets the input value to "0".
Inputs the value.
Setting range: 182.0 to 648.0 mm/7.17 to 25.51 inches
Either the [Standard Size] screen, [Ready] screen or [Custom Fold ] screen
is displayed. The displayed screen differs depending on the settings on
the [Basic Settings] screen and on/off of the automatic detection of paper
size. When the key is grayed out, it cannot be operated because a standard
paper size is not detected.
Returns to the previous screen without saving the input content.
Press and hold to return to the [Ready] screen.
Chapter 1 Before Operation
Function
[5]
[7]
[6]
Function
[4]
[7]
[8]
17