Table of Contents
Advertisement
User Manual
For more information about WiNet-S2, please scan the following QR code to view the quick
guide.
5.7.1 Ethernet Communication
step 1 (Optional) Strip the insulation layer of the communication cable with an Ethernet wire strip-
per, and lead the corresponding signal cables out. Insert the stripped communication cable
into the RJ45 plug in the correct order, and crimp it with a crimper.
Skip this step if a standard network cable with RJ45 plug is prepared.
step 2 Unscrew the swivel nut from the communication module and take out the inner sealing ring.
1: RJ45 plug
5 Electrical Connection
2: Protective cap
49
Advertisement
Table of Contents
