Table of Contents
Advertisement
4 Mechanical Mounting
OT terminal crimp-
ing tool (4 mm
mm
2
)
Phillips screwdriver
(M4)
Heat gun
Rubber mallet
4.4
Moving the Inverter
Before installation, remove the inverter from the packing case and move it to the installation
site. Follow the instructions below as you move the inverter:
•
Always be aware of the weight of the inverter.
•
Lift the inverter using the handles positioned on both sides of the inverter.
•
Move the inverter by one or two people or by using a proper transport tool.
•
Do not release the equipment unless it has been firmly secured.
24
MC4 terminal
2
–6
crimping tool (0.5
mm
2
–1.0 mm
Vacuum cleaner
Open-end wrench
(33 mm, 35 mm)
Hammer drill (φ10)
Electric screwdriver
(M4, M5, M6)
2
)
Measuring tape
Connector wrench
Allen wrench (T27)
User Manual
Slotted screwdriver
(M2)
Heat shrink tubing
Multimeter (≥ 600
Vdc)
Advertisement
Table of Contents
