Table of Contents
Advertisement
7 iSolarCloud App
step 2 Connect the mobile phone to the WLAN network named as "SG-xxxxxxxxxxx" (xxxxxxxxxxx
is the serial number indicated on the side of the communication module).
step 3 Open the App to enter the login screen. Tap Local Access to enter the next screen.
step 4 Tap Confirm, then enter the password and tap LOGIN.Or tap MANUAL CONNECTION at
the bottom of the interface and select WiNet-S/WiNet-S2, then enter the password and tap
LOGIN.
•
If the WiFi signal, serial number or inverter related data information cannot be
found, unplug and reinsert the Winet-S/WiNet-S2 or press the multi-function
button of the Winet-S three times.
•
The default account is "user" and the initial password is "pw1111" which should
be changed for the consideration of account security. Tap "More" at the lower
right corner on home page and choose "Change Password".
step 5 If the inverter is not initialized, navigate to the quick setting screen to initialize the protection
parameters. For details, please refer to "Initial Settings".
The "Country/Region" must be set to the country where the inverter is installed at.
Otherwise, the inverter may report errors.
78
figure 7-1 Enabling the WLAN Hotspot
figure 7-2 WLAN Local Access
User Manual
Advertisement
Table of Contents
