Table of Contents
Advertisement
User Manual
step 4 Fill in the registration information, including email, verification code, password and affirm-
ance and country (region). The distributor/installer has the permission to fill in the company
name and the code of upper level installer/distributor.
The code of upper level distributor/installer can be obtained from the upper level
distributor/installer. Only when your organization belongs to the upper level distrib-
utor/installer organization, can you fill in the corresponding code.
step 5 Tick Accept privacy protocol and tap Register to finish the registration operation.
- - End
7.4
Login
7.4.1 Requirements
The following requirements should be met:
•
The AC and DC sides or the AC side of the inverter is powered-on.
•
The WLAN function of the mobile phone is enabled.
•
The mobile phone is within the coverage of the wireless network produced by the com-
munication module.
7.4.2 Login Procedure
step 1 For the WiNet-S module, press the multi-function button 3 times to enable the WLAN hot-
spot. No password is required and the valid time is 30 minutes.WiNet-S2 skip this step.
7 iSolarCloud App
77
Advertisement
Table of Contents
