User Manual
Improper handling may cause personal injury!
•
Arrange an appropriate number of personnel to carry the inverter according to
its weight, and installation personnel should wear protective equipment such
as anti-impact shoes and gloves.
•
Attention must be paid to the center of gravity of the inverter to avoid tilting dur-
ing handling.
•
Placing the inverter directly on a hard ground may cause damage to its metal
enclosure. Protective materials such as sponge pad or foam cushion should be
placed underneath the inverter.
•
Move the inverter by holding the handles on it. Do not move the inverter by
holding the terminals.
4.5
Installing Mounting-bracket
The inverter can be installed on a bracket, a wall, and a pole by means of mounting-bracket.
Dimensions of the assembled mounting-bracket are as follows.
Reserve enough space when installing the mounting-bracket to meet the installation space
requirements of the inverter.
figure 4-1 Dimensions of Mounting-bracket
4 Mechanical Mounting
25