Ethernet Communication; Check After Wiring; Inspection - Sungrow SG1100UD System Manual

System Manual
Step 4 Loosen the screwdriver, the metal plate returns and compresses the cable.
* The figure is for reference only. The product received may differ.
- - End

6.7.2 Ethernet Communication

Overview
Ethernet communication port located at the lower part of the main inverter unit, as indicated
by A in the following figure.
Procedure
Connect external monitoring devices to the Ethernet port by a CAT-5e cable.
6.8

Check After Wiring

6.8.1 Inspection

Check the wiring thoroughly and carefully when all electrical connections have been
completed.
• Seal the gap between cables and the wiring holes with fireproof and waterproof materials.
• Put all protective covers back in place firmly.
6 Electrical Connection
47