Initialize Element Status (07H); Mode Sense/Select (1Ah/15H); Figure 5-1. Initialize Element Status (07H) - Data Format - Quantum DLT 1 Interface Manual

Chapter 5: Supported SCSI-2 Medium Changer Device Commands
The rest of this chapter discusses commands that are unique to medium changers.
5.1

INITIALIZE ELEMENT STATUS (07h)

The INITIALIZE ELEMENT STATUS command causes the medium changer to initialize the element
status.
Figure 5-1
Bit
Byte
0
1
2 - 4
5
Figure 5-1. INITIALIZE ELEMENT STATUS (07h) — Data Format
5.2

MODE SENSE/SELECT (1Ah/15h)

The tape drive supports all three pages that are specific to Medium Changers.
5-2
shows the data format for the command.
7 6
Logical Unit Number
Unused
5 4
Operation code (07h)
Reserved
Reserved
July 2004
3 2
Reserved
Flag
81-81276-01 Rev A01
1 0
Link