Final driving mechanism
ENGINE REASSEMBLY
NOTE:
When reassembly the engine pay attention, apply engine
oil to sliding parts and running parts before
re-assembling.
CAUTION
Be sure keep the drive belt, drive face and driven
face away from any greasy matter.
l Install the output shaft assembly with a plastic mallet.
l Install the shim drive bevel gear and washer.
l
Tighten the bevel gear nut to the specified torque.
Bevel gear nut torque:100 N.M(10.0 kgf- m, 73 lb-ft)
l Use a center punch stake the nut.
9-10