TGB BLADE 425 Service Manual page 139

Crankshaft / crankcase
OIL PUMP DRIVE GEAR
l Install the pin.
l Install the oil pump drive gear and washer.
l Apply lock tail to the oil pump drive gear bolt.
NOTE:
Flange side of the gear is positioned inside.
l
Tighten the oil pump drive gear bolt to the specified
torque.
Oil pump drive gear bolt: 50 N．M( 5.0 kgf- m,37 lb-ft)
Rotor holder 440665
CAM CHAIN
l Install the cam chain.
CLUTCH SHOE
l Install the clutch shoe assembly.
l Apply Loctite 262
nut.
l Tighten nut to the torque with the special tool.
Shoe nut torque: 120 N．M( 12.0 kgf- m, 88 lb-ft)
Rotor holder 440666
CAUTION
The nut of clutch shoe has left-hand threads.
(Thread locker) to the clutch shoe
TM
11-12