TGB BLADE 425 Service Manual page 57

Precautions in Operation ..................... 5-1
Removal of Engine ............................... 5-2
Engine Installation ................................ 5-7
Precautions in Operation
General Information
● The engine has to be supported with special service tools that can be lifted or adjustable.
● Engine shall be removal in the conditions of necessary repair or adjustment to the only.
● The following parts can be serviced as engine mounted on
frame: Carburetor.
Drive pulley, drive belt, clutch, and movable drive face
assembly. Start motor.
AC. Generator, oil pump and start one way clutch.
Crankcase RH cover.
Clutch housing assy.
Unidirectional clutch.
Clutch assy.
Specification
Engine oil capacity
Coolant capacity
Torque Value
Engine hanger bolt
Exhaust muffler mounting bolt
Exhaust muffler connection nut
5-1
Item
Replacement
Oil and oil filter change
Disassembly
Engine& radiator
Reservoir
Total
55N-m(5.5kgf-m or 40lb-ft)
2.8~3.2kgf-m
1.0~1.4kgf-m
5. ENGINE REMOVAL
Engine Disassembly........................... 5-10
Front differential set oil...................... 5-12
Final gear set oil ................................. 5-13
Capacity
3100 c.c.
3300 c.c.
3500 c.c.
2200 c.c.
1200 c.c.
3400 c.c.
5