Crankshaft / crankcase
REASSEMBLY
l Hook the spiral spring end
case.
WARNING
Wear eye and hand protector when reassembly the
reel, because the spring may quickly unwind and
cause an injury.
l
Apply Grease to the spiral spring.
l Turn the starter rope on the reel properly.
②
l Engage the part
③
End
.
l
Hook the rope onto the hook part
thereel clockwise 5 times with the rope.
l Install the ratchet related parts.
NOTE:
l Apply the shaft and ratchet with Grease.
l Pull the rope and check that the ratchet is pushed out.
①
with the recoil starter
of the reel with the spiral spring
④
of the reel,turn
①
②
③
④
11-8