TGB BLADE 425 Service Manual page 117

DRIVE TRAIN
l Install the rear and front out put shaft.
l Install the C-ring.
NOTE:
Must fit the pins on the bearing into the groove of the
crankcase.
TRANSFER/GEARSHIFT
l
Install the transfer related parts.
l
Install the spacer spring, shaft and reverse idle gear.
l
Install the washer.
CRANKCASE
l Clean R and L crankcase surfaces with cleaning
solvent.
l Fit the dowel pins on the hole.
l Apply engine oil to the gears and conrod.
9-11
Final driving mechanism