TGB BLADE 425 Service Manual page 69

Final gear set oil
Remove the final gear set under cover.
Place an oil pan below the case of final gear set.
Remove the drain blot.
Remove the filler cap
Drain oil nut.
Tighten the drain blot.
Remove the oil check bolt.
Pour the specified oil through the filler hole. until the oil
lever reach the hole lower lever.
Tighten the oil level bolt.
Tighten the filler cap.
Final gear oil drain boil:
34 N-m (3.4 kgf-m, 24 lb-ft)
Final gear oil filler cap:
34 N-m (3.4 kgf-m, 24 lb-ft)
5-13
5. ENGINE REMOVAL