TGB BLADE 425 Service Manual page 114

Final driving mechanism
○
※
Tooth contact: face contact 80% up
Using the tool to install the bearings and joint.
Reassemble the universal joint. When the tooth contact
and backlash have been adjusted or checked.
Tool: AK-014
Install the new c-ring by tapping and hammer. ( copper )
Using the new c-ring for reassembly.
After reassembling the universal joint assy. Check the
joint assy. Movement smoothly. If movement have a
large resistance. Tapping the bearing with the plastic
mallet lightly.
9-8