TGB BLADE 425 Service Manual page 172

Remove 4 socket bolts, and then remove the
brake disk from wheel hub.
Installation
Install the front brake disk to the wheel hub.
Install wheel hub and brake disk on to knuckle.
Install wheel hub washer and tighten the wheel
hub nut.
.
Torque: 9.0kgf-m
Install cotter pin
Install front brake caliper.
Torque: 3.5kgf-m
To this chapter contents
14. FRONT BRAKE & FRONT WHEEL
Wheel hub nut
4 bolts
Cotter pin
2 bolts
14-5