A.c.g. Set Installation; Right Crankcase Cover Installation - TGB BLADE 425 Service Manual

10. ALTERNATOR/STARTING CLUTCH

A.C.G. Set Installation

Install the A.C.G. coil set onto right crankcase cover (3
screws).
Install pulse generator (3 screws).
Tie the wire harness securely onto the indent of
crankcase.
Make sure that the wire harness is placed under
pulse generator.
Left Crankcase Cover Installation
Install dowel pin and new gasket.
Remove water pump cover.
Install left crankcase cover onto the crankcase.
Note: Align the water pump shaft indent with the water
pump gear shaft.
Wire
Dowel pin
3 bolts
3 screws
10-8