TGB BLADE 425 Service Manual page 144

GENERATOR
l Install the key.
l
Install the one way clutch and generator rotor sets.
CAUTION
Be sure the one way clutch on the crankshaft is
fitted into the generator rotor properly.
l
Tighten the generator rotor nut to the specified torque
with the special tool.
Generator rotor nut: 160 N．M( 16.0 kgf- m, 125 lb-ft)
Rotor holder 440664
l Install the output drive gear by installing the snap ring.
11-17
Crankshaft / crankcase