Float Chamber - TGB BLADE 425 Service Manual

Float Chamber

Disassembly
Remove 4 mounting screws and remove float
chamber cover.
Remove the screw, float pin, float and
float valve.
Inspection
Check float valve and valve seat for damage,
blocking.
Check float valve for wearing, and check valve
seat face for wear, dirt.
Cautions
In case of worn out or dirt, the float valve and valve
seat will not tightly close causing fuel level to increase
and as a result, fuel flooding. A worn out or dirty float
valve must be replaced with a new a new one.
Float valve
Pin
Float valve
Check for wear or damage
4. FUEL SYSTEM
4 screws
Float
Screw
Pin
Float
4-7