5. ENGINE REMOVAL
Torque valve:
Engine mounting bracket bolt 26 N-m
(2.6kgf-m,or 19lb-ft)
Apply sealant to the screw.
Apply sealant to the propeller shaft flange coupling bolts.
Tighten them to the standard torque.
Apply sealant to the front propeller shaft flange coupling bolts.
Tighten them to the standard torque.
Torque value:
Front and rear propeller shaft flange coupling bolt:
45N-m(4.5kgf-m, 32.5lb-ft)
Install the new gasket.
.
Apply
to the muffler mounting bolt
sealant
Install muffler. Pay attention don't damage the
connector.
Tighten the exhaust pipe nuts and muffler bolts with
specified torque.
5-8