TGB BLADE 425 Service Manual page 142

l Tighten the movable drive face nut to the specified
torque with the special tool.
Movable drive face nut: 115 N ．M( 11.5 kgf- m,85 lb-ft)
Rotor holder 440666
NOTE:
Turn the fixed drive face until the belt is seated in and
both the drive and driven faces check the belt without
slip.
CLUTCH COVER
l Install the dowel pins and new gasket.
l
Install the clutch cover.
OIL FILTER
l Apply engine oil lightly to the O-ring.
l Install the oil filter turning it by hand until feeling that
the filter gasket contacts the surface of case. Then
Tighten it 2 turns using the oil filter wrench.
Oil filter wrench 440670
11-15
Crankshaft / crankcase