Chapter 5: Configuring the Emulator
Using the Configuration Interface
To start the configuration interface
• Choose Modify→Emulator Config... from the emulator/analyzer interface
pulldown menu.
• Using the command line, enter the modify configuration command.
The configuration interface main menu (see example below) is displayed.
The configuration sections that are presented depend on the hardware and features
of your particular emulator.
The configuration interface may be left running while you are using the
emulator/analyzer interface.
If you're using the Softkey Interface, you don't get a main menu from which to
choose configuration sections; however, the same display area and command line
are used to answer the configuration questions.
104