Chapter 5: Configuring the Emulator
Modifying the General Configuration Items
Modifying the General Configuration Items
In order to modify the general configuration items, you must first start the
configuration interface and access the "General Items" configuration section (refer
to the previous "Using the Configuration Interface" section).
This section shows you how to:
•
•
•
•
•
•
To select the type of processor to emulate
• Answer the "Processor type for 64767A/B emulator?" question.
When using the HP 64767A emulator:
When using the HP 64767B emulator:
112
Select the type of processor to emulate.
Set the target system memory access size.
Select the default physical to logical run address conversion.
Restrict to real-time runs.
Turn OFF the restriction to real-time runs.
Enable/disable entry into the monitor after configuration.
Answer "80C186EA" to emulate the 80C186EA microprocessor.
Answer "80C188EA" to emulate the 80C188EA microprocessor.
Answer "80C186XL" to emulate the 80C186XL, 80C186, or 80186
microprocessors.
Answer "80C188XL" to emulate the 80C188XL, 80C188, or 80188
microprocessors.
Answer "80C186EB" to emulate the 80C186EB microprocessor.
Answer "80C188EB" to emulate the 80C188EB microprocessor.