Table of Contents
Advertisement
Chapter 12: Emulator/Analyzer Interface Commands
copy io_port
copy io_port
This command copies the current values at I/O port locations to the selected
destination.
The I/O port contents are copied in the same format as specified in the last display
memory command.
Contents of I/O ports can be displayed if program runs are not restricted to
real-time. I/O port contents are listed as an asterisk (*) when runs are restricted to
real-time.
Initial values are the same as those specified by the command display io_port 0
absolute bytes.
Defaults are to values specified in the previous display io_port command.
The parameters are as follows:
--EXPR--
An expression is a combination of numeric values, symbols, operators, and
parentheses, specifying a memory address or offset value. See the EXPR syntax
diagram.
thru
This option lets you specify a range of I/O port locations to be copied.
,
A comma used immediately after io_port in the command line appends the current
copy io_port command to the preceding display io_port command. The data
336
Advertisement
Table of Contents
