HP 64767 User Manual page 404

Chapter 12: Emulator/Analyzer Interface Commands
set
<VALUE> Specifies the logical value to which a particular UNIX environment variable is to
be set.
width
source
This allows you to specify the width (in columns) of the source lines in the memory
mnemonic display. To adjust the width of the source lines in the trace display,
increase the widths of the label and/or mnemonic fields.
label
This lets you specify the address width (in columns) of the address field in the trace
list or label (symbols) field in any of the other displays.
mnemonic This lets you specify the width (in columns) of the mnemonic field in memory
mnemonics, trace list and register step mnemonics displays. It also changes the
width of the status field in the trace list.
symbols
This lets you specify the maximum width of symbols in the mnemonic field of the
trace list, memory mnemonic, and register step mnemonic displays.
<WIDTH>
This prompts you for the column width of the source, label, mnemonic, or symbols
field.
Note that <CTRL>f and <CTRL>g may be used to shift the display left or right to
display information which is off the screen.
Examples
set source on inverse_video on tabs_are 2 <RETURN>
set symbols on width label 30 mnemonic 20 <RETURN>
set PRINTER = "lp -s" <RETURN>
set HP64KSYMBPATH=".file1:proc1
.file2:proc2:code_block_1" <RETURN>
See Also
The display data, display memory, display software_breakpoints, and display
trace commands.
404