Table of Contents
Advertisement
In This Book
This book documents the Graphical User Interface and the Softkey Interface when
used with the HP 64767 80186/8/XL/EA/EB emulator and the HP 64703/4/6
analyzer. It is organized into five parts whose chapters are described below.
Part 1. Quick Start Guide
Part 2. User's Guide
Part 3. Reference
Part 4. Concept Guide
Part 5. Installation Guide
6
Chapter 1 presents an overview of emulation and analysis and quickly shows
you how to use the emulator and analyzer.
Chapter 2 shows how to plug the emulator into a target system.
Chapter 3 shows you how to start and exit the HP 64700 interfaces.
Chapter 4 shows you how to enter commands.
Chapter 5 shows how to configure the emulator.
Chapter 6 shows how to use the emulator.
Chapter 7 shows how to use the analyzer.
Chapter 8 shows how to use the Software Performance Measurement Tool.
Chapter 9 shows how to use the external state analyzer.
Chapter 10 shows how to make coordinated measurements.
Chapter 11 shows how to change X resource settings.
Chapter 12 describes emulator/analyzer interface commands.
Chapter 13 lists the error messages that can occur while using the
emulator/analyzer interface.
Chapter 14 lists the emulator specifications and characteristics.
Chapter 15 contains conceptual information on various topics.
Chapter 16 outlines the installation of the Graphical User Interface.
Chapter 17 shows you how to install or update emulator firmware.
Advertisement
Table of Contents
