To Connect To The Rear Panel Bnc - HP 64767 User Manual

Number of HP 64700 Series
Emulators
2 to 8
9 to 16
9 to 16
17 to 32
* A modification must be performed by your HP Customer Engineer.
Emulators using the CMB must use background emulation monitors.
At least 3/4 of the HP 64700-Series emulators connected to the CMB must be powered up before proper
operation of the entire CMB configuration can be assured.

To connect to the rear panel BNC

The BNC line on the HP 64700 accepts input and output of TTL levels only. (TTL
Caution
levels should not be less than 0 volts or greater than 5 volts.) Failure to observe
these specifications may result in damage to the HP 64700 Card Cage.
Chapter 10: Making Coordinated Measurements
Setting Up for Coordinated Measurements
Maximum Total Length of
Cable
100 meters
50 meters
100 meters
50 meters
Restrictions on the CMB
Connection
None.
None.
Only 8 emulators may have rear
panel pullups connected. *
Only 16 emulators may have rear
panel pullups connected. *
289