11
MAINTENANCE WORK ON THE CHASSIS
11.28
Installing the chain guard (50 SX)
11.29
Removing the engine sprocket cover
11.30
Installing the engine sprocket cover
11.31
Checking the chain for dirt
–
Position the chain guard. Mount cable binder
Info
The cable binder must be run between chain sliding guard
swingarm
100816-10
–
Mount the cable binder at the rear.
–
Align the chain guard so that screws
–
Tighten the cable binder and cut off the ends.
100817-10
x
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove screws
–
Remove screw
–
Take off the engine sprocket cover.
100895-10
x
Main work
–
Position the engine sprocket cover. Mount screws
–
Mount and tighten screw
Guideline
Screw, engine sprocket cover
–
Tighten screws
Guideline
Screw, engine sprocket cover
100895-10
Finishing work
–
Remove the motorcycle from the lift stand. (
Preparatory work
(50 SX)
–
Remove the chain guard. (
.
3
of the chain guide are visible.
A
.
1
.
2
.
2
.
1
p. 37)
.
1
and
2
p. 27)
but do not tighten yet.
1
M8
12 Nm (8.9 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 27)
38