Engine Disassembly; Clamping The Engine Into The Engine Work Stand; Draining The Gear Oil; Removing The Clutch Push Rod - KTM 250 EXC EU Repair Manual

18 ENGINE
18.3

Engine disassembly

18.3.1

Clamping the engine into the engine work stand

18.3.2

Draining the gear oil

18.3.3

Removing the clutch push rod

18.3.4

Removing the shift lever

18.3.5

Removing the engine sprocket

–
Mount special tool
Engine assembly stand (61229001000) (
Engine fixing arm (56029002030) (
–
Mount the engine on special tool
308114-10
–
Remove gear oil drain plug
–
Completely drain the gear oil.
308113-01
–
Remove clutch push rod
308115-10
–
Remove screw
308116-10
–
Remove lock ring
308117-10
on engine work stand
1
p. 274)
.
1
with the magnet and seal ring.
1
.
1
with the washers. Take off the shift lever.
1
. Take off the engine sprocket.
1
.
2
p. 275)
133