Table of Contents
Advertisement
11 SERVICE WORK ON THE CHASSIS
11.30
60
700514-01
Removing the engine sprocket cover
H01437-10
H01436-10
Main work
–
Remove screws with toothed washers
2
cap
.
–
Remove end cap and outer tube
–
Remove glass fiber yarn filling
–
Clean the parts that need to be reinstalled and check for dam-
age.
–
Mount the new glass fiber yarn filling on the inner tube.
–
Slide the outer tube over the glass fiber yarn filling.
–
Insert the end cap into the outer tube.
–
Mount and tighten the screws with the toothed washers.
Guideline
Remaining screws,
chassis
Finishing work
–
Install the main silencer. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
(50 SX)
–
1
Remove screws
.
–
2
Remove screw
.
–
Take off the engine sprocket cover.
(50 SX Mini)
–
1
Remove screws
.
–
2
Remove screw
.
–
Take off the engine sprocket cover.
1
from the silencer
3
.
4
from the inner tube.
M6
10 Nm (7.4 lbf ft)
p. 59)
p. 41)
Advertisement
Table of Contents
