ITech IT8700P+ Series User Manual page 62

confirm.
Function Mode
Recall List
Edit List
6. Set the CV Loop response speed: high speed or low speed, press
to confirm.
High Rate
Low Rate
7. Select high/low ranges, such as low range, press
High range
Low range
8. Select Lists steps，such as 5 steps，press
List file step
= 5
9. Set the first step's current, such as 1A, press
Step 001 level
= 1A
10. Set the first step's rise slew rate, such as 1A/uS press
confirm.
Step 001 rate
= 1A/uS
11. Set the first step's time, such as 6S. press
Step 001 width
= 6S
12. Set the second step's current, such as 0A. press
Step 002 level
= 0A
13. Set the second step's rise slew rate, such as 1A/uS. Press
confirm.
Step 002 rate
= 1A/uS
14. Set the second step's time, such as 5S. press
Step 002 width=5S
rd th
15. Set the 3 to 5 steps in same procedure as 0.5A/ 1A/us /4S, 0A/ 1A/us
/2S, 2A/ 1A/us /3S.
16. Select repeat running times, such as 1, press
Repeat count= 1
17. Select the position to save file, such as 1, press
CH01
Save list file = 1
▲ ▲
18. Press key to select <function mode>, press
▲ ▲
press key to select <list>, press
Fixed
List
Esc Esc
19. Press to exit.
On/Off On/Off
，open the load's input.
20. Press
Trig Trig
21. Press to trigger.
Copyright © Itech Electronic Co., Ltd.
Operations introduction
Enter
to confirm.
Enter
to confirm.
Enter
key to confirm.
Enter
Enter
key to confirm.
Enter
key to confirm
Enter
to confirm.
Enter
to confirm.
Enter
to confirm.
Enter
key to confirm,
Enter
to confirm.
Enter
key to
Enter
to
53