Menu List - ITech IT8700P+ Series User Manual

3.1.2 Menu list

Different modules of IT8700 series electronic loads have different setting and
configuration menu according to different working modes.
Press
and
Enter Enter
scroll through the VFD screen, press
press
Setting menu
Press

Setup menu list of IT8732B/IT8733/IT8733B/IT8731/IT8732/IT8722/
IT8723/IT8722B:
Setup
MODE
CC/CV RANGE
I / V / R /W SET
Vmax/Amax
Vmin/Amin
Vd=0.000V
∫=2.500A/uS
∫=2.500A/uS
TRAN A=0.00A
Ta=0.0005S
TRAN B=0.00A
Tb=0.0005S
T MODE

Setup menu list of IT8732BP/IT8733P/IT8733BP/IT8731P/IT8732P/
IT8722P/IT8723P/IT8722BP:
Setup
MODE
CC/CV RANGE
I / V / R /
Vmax/Amax
Vmin/Amin
Alim
Setup Setup
key to enter menu setting, view the menu in VFD and use
▼ ▼
to scroll through the completely menu list as following. Press
key to enter the selected menu function, use
Esc Esc
back to the previous menu selection page.
Setup Setup
key to enter menu setting.
Select working mode
Const Current
Const Voltage
Const Resistance
Const Power
Switch the range
High Range
Low Range
Set the working current/voltage/resistance value
Setup the maximum voltage value/maximum current value
Setup the minimum voltage value/minimum current value
Set the break-over voltage value( Only for CR-LED mode)
Set the up slope (only CC mode available)
Set the down slope(only CC mode available)
Setup level A value
Setup level A width
Setup level B value
Setup level B width
Setup the transient mode
Continuous
Pulse
Toggle
Select working mode
Const Current
Const Voltage
Const Resistance
Const Power
Switch the range
High Range
Low Range
Pset Set the working current/voltage/resistance value
Setup the maximum voltage value/maximum current value
Setup the minimum voltage value/minimum current value
Set limited current value under CV/CR/CW mode.
Copyright © Itech Electronic Co., Ltd.
Enter Enter
key to enter the under submenu,
Load works in CC mode
Load works in CV mode
Load works in CR mode
Load works in CW mode
Continuous mode
Pulse mode
Toggle mode
Load works in CC mode
Load works in CV mode
Load works in CR mode
Load works in CW mode
Panel function introduction
▲ ▲
▲ ▲ ▼ ▼
and to
28