Channel Option; Save And Recall - ITech IT8700P+ Series User Manual

HANDSHAKE SET
EXIT
GPIB address setting
GPIB ADDRESS
GPIB ADDRESS SET
Ethernet Set Ethernet setting
GATEWAY SET
IP SET
MASK SET
PORT SET
EXIT
Expand Module
On
Off <Default>
Parallel Set Parallel mode settings.
Language Set Production protocol
SCPI〈DEFAULT〉
EXTEND TABLE
About Main module production information
IT8700
VER: X.XX
SN: XXXXXXXXXXXXX
EXIT
Automatic test menu
Press
PROGRAM
RUN PROGRAM Run the testing flie
RECALL PROG Recall the testing file
EDIT PROGRAM Edit the testing file
EXIT

3.1.3 Channel option

IT8702/IT8701P/IT8702P can switch the channel. There're 3 ways to switch
channel:


Press

When in SETUP menu, you can directly press the number keys to switch.

3.1.4 Save and recall

First select the channel to be edited at the main frame front panel, after having
edited, press
6 6
Shift Shift
+ key to enter the menu function.
Chan Chan
+number key to switch channel.
▲ ▲ ▼ ▼
Chan Chan
/
Save Save
key to save, press 1 numeric key to save to the first group
Copyright © Itech Electronic Co., Ltd.
None <Default>
Odd
Even
Handshake protocol
None <Default>
CTS/RTS
XON/XOFF
Setup communication adress
Gateway setting
IP setting
Mask setting
SOCKET port setting
Enable this function
Disable this function
SCPI protocol
Expand SCPI protocol, compatible with others
Main frame production model number
Main frame software version
Main frame production serial number
key to switch.
Panel function introduction
34