Gas Flow; Oil Flow - TESTO 330-1G Instruction Manual

1.800.561.8187 1.800.561.8187
6.2.10.

Gas flow

The function is only available if the chosen fuel is a gas.
Calling up the function:
> [ ] → Measurements
Performing the measurement:
1. Start measurement:
- The measuring duration is displayed.
2. When the adjusted gas flow is reached:
- The calculated gas flow and the gas burner capacity (in kW) are
displayed.
Options:
> [Options] → Clipboard: Data are saved to the clipboard.
> [Options] →
is deleted.
> [Options] → Save: The readings are saved in a protocol.
> [Options] →
[Options]
> →
duration and GasPgr can be changed.
6.2.11.

Oil flow

The function is only available if the chosen fuel is an oil.
Calling up the function:
> [ ] → Measurements
Performing the measurement:
1. Select the parameters
Pressure (no effect on calculation): [▲],
2. Enter values. [▲],
- The calculated oil burner capacity (in kW) is displayed.
Options:
> [Options] → Clipboard: Data are saved to the clipboard
> [Options] →
is deleted.
[Options] → Save: The readings are saved in a protocol.
>
> [Options] →
changed (kg/h > gal/h
www. www.
→ [OK] → Gas Flow→ [OK].
[ ].
[
Delete clipboard: Any data saved to the clipboard
Enter heating value: heating value can be set.
Units setting: the unit for gas flow, heating value,
→ [OK] → Oil Flow
Oil Flow (of the oil nozzle) and
[▼]
[▼] and partly [◄], [►]→ [OK].
Delete clipboard: Any data saved to the clipboard
Unit settings: The unit for the oil flow can be
or gal/h > kg/h).
.com .com
6 Using the product
].
→ [OK].
Oil
→ [Edit].
59
information@itm.com information@itm.com