Updating The Instrument Software - TESTO 330-1G Instruction Manual

1.800.561.8187 1.800.561.8187
8.3.

Updating the instrument software

current instrument software (Firmware) for testo 330 (registration
required).
> Unplug the mains unit and switch off the testo 330.
1. Hold [▲] depressed.
2. Plug in the mains unit, keep
- The display shows
[▲]
3. Release
4. Insert the connecting cable (0449 0047) into the USB-port on
the instrument, then connect it to the PC.
- Your PC recognises the testo 330 as a removable medium.
5. Copy the new file (ap330rel.bin) to the detected removable
medium.
- In the display the status bar progresses from left to right. This
process may take a few minutes.
6. Disconnect the connecting cable from the testo 330.
- After updating of the instrument software (Firmware) has been
completed the system will automatically reboot and is ready for
use.
www. www.
you can download the
[▲] depressed.
Firmware update along the bottom edge.
.
.com .com
8 Tips and assistance
79
information@itm.com information@itm.com