Micro Pressure Probe; Co Undiluted - TESTO 330-1G Instruction Manual

1.800.561.8187 1.800.561.8187
Options:
> [Options] → Clipboard: Data are saved to the clipboard.
> [Options] →
is deleted.
> [Options] → Save: The readings are saved in a record.
[Options]
> →
form of a line graph.
> [Options] →
parameters to be represented (max. 4) can be displayed (
hidden ( ).
> [Options] →
during a measurement): The readings display menu is opened.
4.
6.2.4.

Micro pressure probe

The following measurements can be performed using the micro
pressure probe (0638 0330):
• Ext-Draught
Ext-Delta-P Single meas.
•
• Ext-Delta Program
See instruction manual for micro pressure probe.
5.
6.2.5.

CO undiluted

Calling up the function:
✓ A multi-hole probe (0554 5762) must be connected.
> [ ] → Measurements
Performing the measurement:
1. Start measurement:
- The reading is displayed.
2. Quit measurement:
Options:
> [Options] → Clipboard: Data are saved to the clipboard.
[Options] → Delete
>
is deleted.
> [Options] → Save: The readings are saved in a record.
> [Options] →
form of a line graph.
www. www.
Delete clipboard: Any data saved to the clipboard
Show Graphic: The readings are displayed in
Configure Graphic: The measurement
Measurement view: (This function is not available
→ [OK] → CO undiluted
[ ]
[ ]
clipboard: Any data saved to the clipboard
Show Graphic: The readings are displayed in
.com .com
6 Using the product
) or
→ [OK].
55
information@itm.com information@itm.com