Gas Flow; Oil Flow - TESTO 330 Instruction Manual

6 Using the product
Options:
> [Options]
> [Options]
> [Options]
form of a line graph.
Pos: 70 /TD/Produkt verwenden/testo 330/testo 330_Gasdurchsatz @ 6\mod_1279183937795_79.doc @ 66291 @
6.2.10.

Gas flow

The function is only available if the chosen fuel is a gas.
Calling up the function:
> [
Performing the measurement:
1. Start measurement:
- The measuring duration is displayed.
2. When the adjusted gas flow is reached:
- The calculated gas flow and the gas burner capacity (in kW) are
displayed.
Options:
> [Options]
> [Options]
> [Options]
> [Options]
changed
Pos: 71 /TD/Produkt verwenden/testo 330/testo 330 Öldurchsatz @ 6\mod_1279183991201_79.doc @ 66323 @
6.2.11.

Oil flow

The function is only available if the chosen fuel is an oil.
Calling up the function:
> [
Performing the measurement:
1. Select the parameters
Pressure
2. Enter values. [▲],
- The calculated oil burner capacity (in kW) is displayed.
52
→ Clipboard: Data are saved to the clipboard:
→ Save: The readings are saved in a record.
→
Show Graphic: The readings are displayed in
→
] Measurements
[
→ Clipboard: Data are saved to the clipboard:
→ Save: The readings are saved in a protocol.
→
Edit Gas
→
Edit Unit: The unit for the gas flow can be
(m3 > l or l >
→
] Measurements
(no effect on calculation): [▲],
[▼]
→ →
[OK] Gas Flow→ [OK].
].
[
Flow: Set the gas flow value.
m3).
→ →
[OK] Oil Flow
Oil Flow (of the oil nozzle) and
and partly [◄], [►]→ [OK].
].
→ [OK].
Oil
→ [Edit].
[▼]