O2 Air; Gas Flow Rate - TESTO 320 Instruction Manual

6.2.11.
6.2.12.
info@Testo-Direct.com
All manuals and user guides at all-guides.com

O2 air

✓ An O2 dual wall clearance probe (0632 1260) must be
connected.
Call up function:
> [ ] → Measurement options
Carrying out the measurement:
1. Start measurement:
- The measured value is displayed.
2. End measurement:
Options:
> [Options] → Clipboard: data is saved to the clipboard.
[Options] Delete
> →
is deleted.
> [Options] → Save: the measured values are saved in a record.

Gas flow rate

The function is only available if the chosen fuel is a gas.
Call up function:
[ ] Measurement options
> →
Carrying out the measurement:
1. Make a note of the gas meter value.
2. Start measurement:
3. When the adjusted gas flow is reached:
- The calculated gas flow rate and the gas burner capacity (in
kW) are displayed.
Options:
> [Options] → Clipboard: data is saved to the clipboard.
> [Options] → Delete
is deleted.
> [Options] → Save: the measured values are saved in a record.
[Options] Enter Gas
> →
[Options] Enter heating
> →
> [Options] → Units
duration and GasPgr can be changed.
www.
→ [OK] →
[ ].
[ ].
clipboard: any data saved to the clipboard
[OK]
→ →
[ ].
[
clipboard: any data saved to the clipboard
Flow: set the gas flow value.
value: heating value can be set.
setting: the unit for gas flow, heating value,
Testo-Direct
6 Using the product
O2air → [OK].
Flowrate → [OK].
].
53
1.888.610.7664
.com