Password Protection; Sensor Settings; Addition - TESTO 330-1G Instruction Manual

1.800.561.8187 1.800.561.8187
6.1.2.6.

Password protection

The password protection is only valid for functions identified by the
following symbol:
Password protection can be activated / deactivated, the password
can be changed.
To deactivate the password protection change the password to
0000 (factory setting).
Calling up the function:
> [ ] → Instrument Settings
→ [OK]
Possibly:
> Enter the currently valid password:
[Enter] → Enter password →
Changing the password:
1. [Edit].
2. Enter the new password → [Next].
3. [Edit].
4. Enter the new password again to confirm → [Next].
5. Save changes: [Finished].
6.1.3.

Sensor settings

6.1.3.1. NO

addition

2
The NO2 addition parameter can be set.
The setting of the NO2-addition can be password protected, see
Password protection, page 45.
Calling up the function:
> [ ] → Sensor Settings
Possibly:
> Enter the password:
[OK].
Setting the NO
2
> Set parameter → [OK].
www. www.
or .
→ [OK] → Password Protection
[Next] → [OK].
→ NO2 Addition
[Enter] → Enter password →
addition:
.com .com
6 Using the product
→ [Edit].
[Next] →
45
information@itm.com information@itm.com