Measurement Records - TESTO 330-1G Instruction Manual

1.800.561.8187 1.800.561.8187
5 First steps
Create a new measuring location:
A location is always created under an address.
1. Select the address in which the location is to be created.
2. [Options] →
3. Enter values or make settings.
4. Finalise the entry: [Finished].
Other location options:
> [Options] →
location.
> [Options] →
location in the same address.
> [Options] →
Create new address:
1. [Options] →
2. Enter values or make settings.
3. Finalise the entry: [Finished].
Other address options:
• Edit address: make changes to an existing folder.
• Copy address: make a copy of an existing folder.
• Delete address: delete an existing folder, including the
locations created therein.
• Delete All addresses: delete all existing folders, including the
locations created in them.
5.4.

Measurement records

Calling up the function:
> [ ] → Measurement Records
There are various options for opening protocols, see
Address/Location, page 34
Displaying a record:
1. Choose the required record from the detailed view.
2. Print [Data].
36
www. www.
New/Location → [OK].
Edit location: make changes to an existing
Copy location: make a copy of an existing
Delete location: delete an existing location.
New address → [OK].
→ [OK].
.com .com
information@itm.com information@itm.com