Smoke No. / Hct; Differential Pressure - TESTO 330-1G Instruction Manual

1.800.561.8187 1.800.561.8187
6 Using the product
6.2.6.

Smoke No. / HCT

Calling up the function:
> [ ] → Measurements
The parameters
available for oil fuels.
Determining smoke tester no. / smoke nos. / oil derivative with
the smoke pump and entering manually:
1. Select parameter → [Edit].
2. Enter data or values →
Determining smoke tester no. / smoke nos. / oil derivative with
the smoke tester testo 308 and transferring wireless:
- The testo 308 must be in data transfer mode (
[Options] → t308.
>
- The values recorded by the smoke tester are transferred to the
testo 330.
Entering the heat carrier temperature:
>
Heat carrier
Options:
[Options] → Clipboard: Data are saved to the clipboard
>
> [Options] →
is deleted.
> [Options] → Save: The readings are saved in a record.
> [Options] →
6.2.7.

Differential pressure

WARNING
Dangerous mixture of gases
Danger of explosions.
> Make sure there are no leaks between the sampling point and
the measuring instrument.
> Do not smoke or use naked flames during measurement.
Do not measure for longer than 5 min, as the drift of the
pressure sensor could have the effect that the readings are
outside the tolerance limits.
56
www. www.
→ [OK] → Smoke No. / HCT
Smoke No. and Oil derivatives
[Next] or [OK].
→ [Edit] → Enter value → [OK].
Delete clipboard: Any data saved to the clipboard
Reset values: The entered values are deleted.
.com .com
→ [OK].
are only
lights up).
information@itm.com information@itm.com